Smart value motion · coordinated configuration
WECON servo drives
A drive, servo motor, power cable and encoder cable for standard axes in new machines and retrofits, with a practical budget.
- Mechanical assessment
- PLC control selection
- Matched cables
WECON · SMART VALUE
An axis configured for the task
We select the drive series, motor, encoder and cables for the machine’s actual operating conditions.
01 · DRV Pulse+Dir or EtherCAT
02 · MTR WD / WE matched to axis torque
03 · CBL Power + encoder cables
Compatibility checked by PNEUSYS
Practical costFunctions matched to the task
Two approachesPulse+Dir or EtherCAT
Defined contentsDrive, motor and cables
For retrofitsAssessment of existing mechanics
When to choose WECON
A practical solution for standard machine axes
WECON suits applications that need clear positioning requirements, a controlled budget and a coordinated kit without unnecessary complexity.
01
Standard axis
Feeders, conveyors, dosing units, packaging or assembly mechanisms.
02
Serial production machine
A repeatable configuration with defined contents and predictable cost.
03
Retrofit
Replacement of an older drive after checking mechanics, PLC and mounting.
04
Budget control
Features selected for the task without paying for unused options.
Platform
How a WECON servo system is configured
We select the series by supply, power, control method, encoder and required functions.
Pulse+Dir
VD2L / VD2
A practical choice for pulse control from a PLC.
EtherCAT
VD3E / VD5L
A networked platform for coordinated control and diagnostics.
Servo motors
WD / WE
Different frame sizes, power ratings, encoder types and brake options.
Feedback
Encoder and cables
Encoder type and connectors must match the drive and motor exactly.
| Approach | Control signal | Suitable when |
|---|---|---|
| Pulse+Dir | Position and direction pulses from a PLC | A standard standalone axis, simple integration and a controlled budget |
| EtherCAT | Real-time industrial network | Multiple axes, synchronization and centralized diagnostics |
Note: The PLC must support the chosen interface. Check encoder type, supply and full motor and drive codes before ordering.
Kit contents
What a WECON servo kit includes
The base kit provides control, motor power connection and feedback.
DRV
Servo drive
Series, current rating, supply and interface selected for the application.
MTR
Servo motor
Power, torque, speed, encoder and brake.
PWR
Power cable
A drive-to-motor connection of the required length.
ENC
Encoder cable
Carries position and speed feedback to the drive.
Example configurations
Defined contents and key parameters
Examples do not replace load calculations or compatibility checks against full model codes.
Pulse+Dir · 220 V
VD2L-010SA1P / WD60M-04030S-A1F + 3M
- Power: 0.4 kW
- Rated torque: 1.27 Nm
- Rated speed: 3000 rpm
- Cables: 3 m
EtherCAT · 220 V
VD5L-014SA1P / WD80M-10030S-C1F + 3M
- Power: 1 kW
- Rated torque: 3.18 Nm
- Rated speed: 3000 rpm
- Cables: 3 m
FAQ
WECON servo kit FAQ
Three checks that help avoid ordering errors.
Pulse+Dir or EtherCAT?
It depends on the PLC, axis count, synchronization and diagnostics. PLC and drive interfaces must match.
Can I replace the motor with another of the same power?
Not automatically. We check torque, speed, inertia, encoder, connectors, flange, shaft, brake and drive compatibility.
Are both cables included?
It depends on the kit’s product code. Before ordering, we verify the power and encoder cables and their lengths.
Engineering request
Let us select a WECON kit
Send your axis data. We will check the mechanics, supply, PLC, encoder and cables.
- Torque, speed and inertia
- Pulse+Dir or EtherCAT
- Complete kit specification
Describe your application
Enter your axis parameters or attach a specification. An engineer will contact you after receiving the request.